1. One of the main materials will be those American walnut pieces. Since I don't have a thickness planer - I ordered to prepare all workpieces of t...

2. The very first step is to glue every 4 pieces together by misaligning them in a random pattern. The same procedure was done with longer pieces t...

3. The second glue-up was similar to the first one. The only difference was that this time I glued 4 already pre-glued boards to a solid rectangula...

4. Used miter saw and flattened one end of each block. Sacrificial plywood pieces helped to avoid any walnut tear outs.Cleaned cut ends with the sa...

5. I used a palm router and milled a hole on the flat walnut block end. Here will be hidden all electronics parts.Drilled 3-millimeter hole all the...

6. I mixed a small part of the same epoxy resin which will be used later and covered all wood surfaces which will have a contact with epoxy resin p...

7. I bought this fairy string LED light with 100pcs of individual colored LEDs connected inline. It could be powered from any USB power source, lik...

8. From random plastic that layed around I start making the outer form for epoxy resin pour. Placed on the side a straight reference and adjusted t...

9. Ok, the epoxy resin. I bought locally this highly transparent and UV stabilized epoxy casting resin. It’s designed to use in deep pours, like up...

10. This epoxy requires 3 days to fully cure, but I left it a bit longer. One week later the resin was rock solid and it was the perfect time to re...