1. This project requires all of the materials/tools listed below.- Scroll saw- Glue stick Baltic birch plywood ⅛ Black paint or spray paint Sand pa...

2. Use the glue stick to stick the template to the workpiece. Make sure to lay it out evenly and press it down smoothly from one side to the other,...

3. Drill a hole in the section of the workpiece that you want to remove. Make sure that the hole is significantly larger than the blade you are using.

4. In Order to cut out a shape from the inside of workpiece you need to start cutting from the inside. Remove the blade from the saw and remount it...

5. Proceed to cut on the inside of the lines outlining the piece that you want to remove.

6. Remove the blade from the saw, and remove the workpiece from the saw before putting the blade back.

7. Peel the template off of the workpiece, being careful to get all of it off of the wood.

8. Use a piece of sandpaper to smoothen the cut edges, going over each edge multiple times. The face of the workpiece, that had the template on it...

9. Lay out your workpiece on a sacrificial board, or a piece of cardboard. Apply several coats of paint, waiting until each layer is dried before a...

10. For this step you need to be very careful to only apply glue to the backside of the workpiece. Once this is done, delicately place another boar...