Printing PETG help - Snapmaker 2.0 - Snapmaker 2.0 - Snapmaker: …
Jan 10, 2021 · Hi, I’m printing PETG for the first time and can’t seem to get the settings right. I’ve printed with PLA plenty previously. I’ve attached my settings. When I try to print, the first layer is very uneven and there are random bumps and stringing. I’ve printed a temperature tower before and 250 nozzle temp looks the cleanest. I used gluestick to layer the bed prior to printing. Does ...
Basic Stringing Test by Loohney - Thingiverse
Print this first without any retraction, this will print with a horrible stringing effect.Then work your way up and activate as much retraction as needed until both towers are perfectly printed without any strings between them.Regards
SUNLU PETG - Advice needed - Snapmaker: where creation happens
Mar 9, 2021 · Hey, I’ve been trying to get a roll of SUNLU PETG (Black) printing, it performs well in every regard and was easy to get calibrated for size/temperature/bed adhesion…But it strings like hell. It’s also pretty fresh out of the package, just did calibration prints so far. I’ve tried retraction values of 0-8mm at 60mm/s (0.25mm intervals in case it was just a really specific …
PETG Printing Problems - Page 2 - Snapmaker: where creation …
Mar 8, 2024 · Set Initial Layer Print Speed to 15 (PETG like to go slower than PLA) Set all other print speeds to max of 40 Set all travel speeds to max of 80 Reduce cooling to 20% Reduce retraction distance to 0.2 Reduce retraction speed to 30. And… I got a pretty good print! For some reason, it printed to 95% and then stopped.
PETG temperature tower test (for CURA) by cuzzea - Thingiverse
It looks like this Thing has been removed or has never existed in Thingiverse.
Ender 3 Smart PLA and PETG Temp Tower (gcode included) by …
HOW TO USE A TEMP TOWER: Run this G-code (or code the STL yourself) and see which temp gives you the least amount of stringing and best overall look and strength. Check out my calibraton guide on Reddit for more detailed tuning instructions.CHANGE LOG:Removed the base from the original when I sliced it up. Included is the gcode file. Made for my Ender 3 Pro, but …
ABS base layer- Want to use PETG - Snapmaker Artisan
Apr 25, 2024 · All right smart people, I’m pretty sure this can be done, but have no idea how to execute. So I love and hate PETG and ABS. Love that PETG sticks like glue to my build plate, hate the stringing. Love the strength and and material properties of ABS, hate it’s build plate adhesion. So what I want to do is print the base layer in PETG and the rest of the model in …
PETG settings - Snapmaker: where creation happens
Apr 4, 2022 · Being a Newbie, to 3D printing, I started with PLA and PLA+…and feel pretty comfortable with printing with those. PETG, even though I seem to have read every article and tried many settings, I still get blobs, but only on vertical surfaces. I have been trying different settings with a very simple test model - and as you can see on the vertical face, there are …
Ultrafast and economical stringing test by s3sebastian
There are already many calibration and test parts to get rid of the stringing of your printer, but this one is optimized so that you can print it quickly to achieve many iterations in a short period of time without wasting too much filament.If you see that there still is no improvement you can stop the print and start a new one. It will be at the point again quickly where the two pyramids ...
PETG: Test Print by HLFRENGR - Thingiverse
This was a test print of the Hatchbox© PETG-Blue on the Prusa i3 MKS3+ to tune in the printing parameters for the PETG material.§ FILAMENT SETTINGSThe default Prusa 'Filament Settings' from the 'Generic PETG' profile were used with the following changes:Temperature - Nozzle - First Layer: 2̶3̶0̶° →235°C(May consider reducing after seeing all the stringing from the high …