Issues connecting to M8190A - Keysight
WEBIssues connecting to M8190A. We have real problems connecting to an M8190A via PCIe. The soft front panel will just come up with a simulated unit. I've tried all combinations of the order I start things. The manual says to start the AWG first, but that doesn't guarantee it working. The Access and Status lights are both green.
Find the IP address of M8190A - community.keysight.com
WEBFind the IP address of M8190A. We have just gotten an M8190A ARB, in an AXIe chassis. We can connect to the AXIe chassis through its network port, and the IO Connection Expert shows the M8190A. However, the connection expert does not show any address or id for the M8190A. Also, the utility that comes with the M8190A does not show the device.
Multi-tones from M8190A via Matlab - Keysight
WEBMulti-tones from M8190A via Matlab. I've successfully used the MATLAB iqmain scripts to generate multi-tones using 81180A ARBs and a E8267D. I am now trying to do the same thing with a DemStock M8190A 12GSa ARB. When I use the iqmain multi-tone script to generate the tones, I am able to produce the tones (visible on a PXA) but this is ...
M8190A dynamic sequencing - Keysight
WEBM8190A dynamic sequencing. I am trying to set up dynamic sequencing on my M8190A AWG. I am controlling the AWG via a C++ program which calculates the waveforms and sends the necessary commands to the AWG to upload the data. This program works for single segments but so far I have been having trouble getting it to work for sequences.
M8190A relative amplitude arbitrary multi-tones - Keysight
WEBI have some inconvinience witht he M8190A AWG. I am trying to generate a multi-tone output. Therefore I use the Soft Front Panel for the M8190A. When setting the Tone Distribution to "Arbitrary", you could define the tones yourself, including amplitude and phase. I am wondering how the amplitude given in this field relates to the output amplitude.
[M8190A] DAC value range to output voltage - Keysight
WEBI am trying to send my own waveforms to the M8190A via VISA/matlab. The programming guide states that: DAC values have 14 bit resolution in precision mode and 12 bit in speed mode. DAC values are signed. Valid range is -8192 to +8191 in precision mode and -2048 to 2047 in speed mode.
Why does my M8190A fail when triggering a high frequency
WEBWhy does my M8190A fail when triggering a high frequency waveform? In real mode (not interpolated) I can generate a sinusoid in standard waveforms, say, 200 MHz at 7.2 GSa/s, with 7200 samples, and this plays out fine with continuous trigger. Then I use the internal trigger at 10 kHz, and set the trigger mode to triggered, and it still plays ...
We have a M8190A in a M9502A AXIe Chassis connected via PCIe …
WEBSince the M8190A has an IVI-COM driver and you are asking in the VEE forum, how about installing the 32-bit (not the 64-bit one) driver and see if you can control it from VEE. If you can then that pretty much confirms that the problem is with Benchlink.
How Can I generate BPSK modulated signal in M8190A AWG?
WEBKeysight Community. Discussion Forums. Contact Us
Can I use M8190A to generate LFM at RF frequency directly?
WEBYes, you can use the M8190A arbitrary waveform generator (AWG) to generate linear frequency-modulated (LFM) signals at radio frequency (RF) directly. The M8190A is a high-performance AWG capable of generating signals with wide bandwidths and high resolution, making it suitable for RF applications.