1. I’ve rearranged my shop recently, and most notably for the dust collection that I hard piped in a few months back. But, while I was at it, I tho...

2. 2 1/2" Screws: https://amzn.to/2NUvES4 1 1/4" Screws: https://amzn.to/3sjYJW7 Drill & Driver: https://amzn.to/3qOPXz9 4" Doub...

3. At the time of doing this project, a single 2x4 was about $7 (which is pretty expensive…roughly double what it typically is), so I chose to pick...

4. First, start with your side pieces. We will basically make two squares for the sides that are exactly alike. Then, we will connect them with som...

5. Once you have both side assemblies done, use one of the longest boards to connect them. I liked the look of having this board basically cap the...

6. Next, add the 57” piece between the two sides. This will create the structure for the lower shelf. I have the shelf as a half shelf in this plan...

7. Now, we need to add some support braces so the top piece of MDF doesn’t have any chance of sagging. Just like on the lower shelf, we are going t...

8. I didn’t go crazy with it, but I did take a couple of minutes to sand the piece. I just wanted to remove some of the writing that was on the 2x8...

9. Before too much weight gets on this base with the MDF, it’s a good idea to flip it over and attach the casters. These are the simple screw in ty...

10. Now, it’s time to cut out all of the MDF parts to use for the top of the table and the shelf platform. If you don’t have any of this rigid foam...