Jan 19, 2011 · Here is a picture of the process with the Redneck Press removed, to show that the bushing is indeed beginning to move - Keep on twisting the nuts attached to the threaded rod, …

Oct 8, 2023 · Reading more into the cheaper Amazon press kits, seems they can have some problems. Hoping to not get the UCAs off my truck only for bushing press to fail and be stuck …

Aug 25, 2014 · I learned you can invert the redneck press and make it a redneck push. By reversing the idea and pushing from the other bushing ring you can smash the retainer lip …

Apr 26, 2022 · Bushing Press Recommendations. Discussion in '3rd Gen. Tacomas (2016-2023)' started by DRS1984, Apr 26, 2022.

Jan 19, 2011 · Need a crescent wrench that opens 2.25". A propane torch may be needed to break the bushings free. Did't take much heat to remove mine; less than a minute for the small …

Jan 31, 2018 · I have a newer OTC BJ press. Although the majority of OTC stuff is now made in Taiwan, the BJ press is forged in the US and a quality unit. The Astro unit is very well …

Mar 23, 2022 · You don't need a press at all. I have done 3 sets now for 1st gen. This is for replacing with energy suspension bushings. If replacing with oem style bushing, you might …

Feb 9, 2016 · This is how Toyota wants you to do it, since they don't sell replacement bushings, and replacing the entire LCA means you don't need any special tools to press out the old …

Jan 19, 2011 · Sadly, if it's a true "Nor-east coast" related seized bushing with its bolt rusted fast to the inner sleeve, (commonly induced by DOT road calcium), I'll bet you all a paycheck …

Jul 27, 2020 · Use an impact wrench to tighten the screw/nut and press the bushing in or out.You will need a 1/2 drive socket to use a spacer when the nuts gets good and burried. 1-1/2"x3" …