Bainite - Wikipedia
The bainite, like martensite, grows without diffusion but some of the carbon then partitions into any residual austenite, or precipitates as cementite. A further distinction is often made between so-called lower-bainite, which forms at temperatures closer to the martensite start temperature, and upper-bainite which forms at higher temperatures.
Bainite - Metallurgy for Dummies
Bainite. Bainite is an acicular microstructure (not a phase) that forms in steels at temperatures from approximately 250-550°C (depending on alloy content). First described by E. S. Davenport and Edgar Bain, it is one of the decomposition products that may form when austenite (the face centered cubic crystal structure of iron) is cooled past a ...
贝氏体 - 维基百科，自由的百科全书
貝氏体 （英語： Bainite），也译作 變韌鐵，是合金 钢 在 热处理 时形成的一种显微组织组成物，是由 沃斯田鐵 在 波來鐵 温度范围以下和马氏体点（麻田散鐵 转变开始的温度）以上的温度范围内分解而成的 肥粒鐵 和 雪明碳鐵 的混合体 [1]。. 最早由 埃德加· ...
What is Bainite - Bainitic Steel - Definition - Material Properties
Bainite is a plate-like microstructure that forms in steels from austenite when cooling rates are not rapid enough to produce martensite but are still fast enough so that carbon does not have enough time to diffuse to form pearlite. Like pearlite, the constituent phases …
贝氏体 - 百度百科
在此基础上又设计出碳含量仅为0.3%（质量分数）的30Mn Si Cr Al Ni Mo低碳钢，通过对其热处理工艺的研究发现，在温度区间MS+10℃～MS-20℃以0.5 ℃/min连续冷却转变可得到低温贝氏体，通过对比，在此工艺下得到的低温贝氏体组织具有最好的综合力学性能，且比等温 ...
Bainite - an overview | ScienceDirect Topics
Bainite is a term that was coined more than 50 years ago to refer to non-lamellar products of eutectoid decomposition observed in steels (Hultgren, 1920; Davenport and Bain, 1930; Greninger and Troiano, 1940). It has since been applied to other alloy systems (such as Ti-based alloys) as well (Lee and Aaronson, 1988; Furuhara, 1990).
變韌鐵 - 維基百科，自由的百科全書
貝氏体（英語： Bainite ），也譯作變韌鐵，是合金鋼在熱處理時形成的一種顯微組織組成物，是由沃斯田鐵在波來鐵溫度範圍以下和麻田散鐵點（麻田散鐵轉變開始的溫度）以上的溫度範圍內分解而成的肥粒鐵和雪明碳鐵的混合體 [1] 。
Bainite – Knowledge and References – Taylor & Francis
Bainite is a microconstituent or microstructure that forms in steel when it is isothermally transformed from austenite at temperatures between the minimum pearlite formation temperature and the start of the martensite transformation temperature. It is characterized by a mainly bainitic microstructure that provides excellent combinations of ...
Bainite - Corrosionpedia
Jul 19, 2024 · What Does Bainite Mean? Bainite is a crystalline microstructure that can be found in steel. Bainite forms when steel is cooled slower than the rate required to form martensite but faster than the rate that would be required to form pearlite or another slower cooling rate crystalline microstructure.
金相学基础--贝氏体 - 知乎 - 知乎专栏
贝氏体，贝茵体，（bainite）又称贝茵体。钢中相形态之一。钢过冷奥氏体的中温(Ms～550℃)转变产物，α-Fe和Fe3C 的复相组织。用符号B表示。贝氏体转变温度介于珠光体转变与马氏体转变之间。